Christ Touch-it XPC Provozní pokyny stáhnout pdf (Strana 15)

E461201 14

7.2. Ethernet (LAN)

The connection to an Ethernet network (10/100/1000BASE-TX) is carried

out with a RJ45 socket. It is recommended to use a CAT. 5 cable or

higher for the connection to the network.

Picture 13: pin assignment Ethernet (RJ45 socket)

pin 1: D1+ pin 5: D3-

pin 2: D1- pin 6: D2-

pin 3: D2+ pin 7: D4+

pin 4: D3+ pin 8: D4-

The Touch-it XPC offers two Ethernet network interfaces.

7.3. COM1 (EIA-232 interface)

Picture 14: pin assignment EIA-232 interface (DB9 male socket)

COM1

pin 1: DCD pin 6: DSR

pin 2: RX pin 7: RTS

pin 3: TX pin 8: CTS

pin 4: DTR pin 9: RI

pin 5: GND

7.4. VGA

Picture 15: pin assignment monitor interface

VGA

pin 1: red pin 6: GND pin 11: ID0

pin 2: green pin 7: GND pin 12: DDC DATA

pin 3: blue pin 8: GND pin 13: H_SYNC

pin 4: n. c. pin 9: +5V pin 14: V_SYNC

pin 5: GND pin 10: GND pin 15: DDC CLK

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Žádné komentáře

Christ Touch-it XPC Provozní pokyny Strana 15